Simrad EQ 55 Spezifikationen PDF herunterladen (Seite 58)

EQ42/50/52 Installation and service Chapter 9

9.6.4 NMEA0183 interface connections

NMEA0183 interface connections are made to the receptacle marked “NMEA1”

or NMEA2” on the rear of the cabinet – turn the plug’s coupling ring clockwise

until it stops.

) The EQXX must be turned off while connecting/disconnecting the interface

cables.

9.6.5 Optional connections

EQXX, port NMEA1 and NMEA2

Pin 6 White TX A (DATA OUT)

Pin 7 Brown TX B (RETURN)

Pin 8 Yellow RX A (DATA IN)

Pin 9 Green RX B (RETURN)

9.6.6 Universal connection cable for unspecified transducers

Transducers are recommended to be 60 to 80 ohms and minimum 1kW. The uni-

versal connection cable should be applied for connecting one or two transducers

to either ECHO1 or ECHO2 port.

ECHO 1 ECHO 2

1 Red Speed log Depth 1+

2Black(brown) VCCspeed Depth1-

3 Blue Depth 1+ Depth 2+

4 Shield Shield Shield

5 White(orange) Depth 1- Depth 2-

6 Green Gnd.* Gnd. (Temp.)

7 Yellow

Temp.

*) Temp./speed log

Temp.

Connection cable

CabletypeAMWSTYLE2464

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 79 80

Keine Kommentare

Simrad EQ 55 Spezifikationen Seite 58