Simrad SP270 Installationshandbuch PDF herunterladen (Seite 122)

Simrad SP 270

RemountiIJQjj\

tb1eF"el,

ectronic

drawer unit

When both the course

gyro and speed log work properly, the

electronic drawer unit can be installed into the cabinet:

Set the switch S101 at the rear of the drawer to OFF.

If the external cable connections not are threaded

through the cabinet, disconnect all the connections at the

rear of the drawer unit.

Disconnect the two cables from the drawer unit to the

display.

Remount the drawer cover.

Refer to figure 10 to reconnect the two display cables.

To display

Figure 10 Remounting

the electronic drawer

unit

Arrange the two display cables as shown in figure

13 and

guide the drawer unit gently into the cabinet.

Be aware

of the two guiding pins at the

rear of the cabinet to match

the holes at the rear of the drawer unit. Fasten the

drawer unit with the four front fastening screws.

160573/A

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 253 254

Keine Kommentare

Simrad SP270 Installationshandbuch Seite 122