Simrad SP270 Installationshandbuch PDF herunterladen (Seite 62)

Simrad SP270

851-160572 / B

Panel mounting

1 Dismount the mounting bracket from the Sonar Control

Unit by unscrewing the four bolts on the front. An Allen

key is located in the spare parts box.

2 Cut the panel opening to the following size:

a Width: 345 mm

b Height: 380 mm

3 Place the cabinet into the opening to mark the four

fastening holes.

4 Remove the cabinet and drill the four fastening holes in

the panel.

a Metal panel: Drill 5mm holes for threading with M6

tap, or 7mm holes if through-bolts with nuts are

preferred.

b Wooden panel: Drill 9mm holes for the four thread

inserts which are located in the spare parts box. Refer

to figure 12 for information about mounting the thread

inserts.

5 Place the cabinet into the opening and fasten it with the

four bolts.

Figure 12 Mounting the thread inserts

ø9

(CD1861)

Hold on screw with

the allen key, and

loosen the nut

Insert by using spanner

to the nut.

Observe alignment.

Insert to be 90° to panel

+0.3

- 0

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 253 254

Keine Kommentare

Simrad SP270 Installationshandbuch Seite 62