Simrad SP270 Installationshandbuch PDF herunterladen (Seite 30)

Simrad SP270

851-160571 / B

If the unit contains normal batteries, these may have been

disconnected/isolated before the unit was packed. These must

then be reconnected during the installation procedure. Units

containing batteries are marked.

Caution Units containing lithium or alkaline batteries must be

handled separately and with care. Such units are

marked accordingly. Do not attempt to recharge such

batteries, open them or dispose of them by

incineration. Refer to the applicable product data

sheets.

After use storage

Introduction

If a unit is removed from its operating location and placed into

storage, it must be properly cleaned and prepared before

packing.

Cleaning cabinets

If the unit may have been exposed to salt atmosphere while it

was in use, it must be thoroughly cleaned both internally and

externally to prevent corrosion.

• Wipe the cabinet externally using a damp cloth and a little

detergent. Do not use excessive amounts of water as the unit

may not be water tight. On completion, dry the unit

thoroughly.

• All surfaces must be inspected for signs of corrosion, eg.

flaking/bubbling paint, stains etc. Damaged or suspect areas

must be cleaned, prepared and preserved using the correct

preservation mediums for the unit. The mediums to be used

will usually be defined in the units’ maintenance manual.

• Open the unit, and using a vacuum cleaner, remove all dust

etc. from the unit. Great care must be taken to ensure the

circuit boards and modules are not damaged in the process.

Mechanical units

If the mechanical unit may have been exposed to a salt

atmosphere while it was in use, it must be thoroughly cleaned

both internally and externally to prevent corrosion.

• If the construction materials and type of unit permits, wash

the unit using a high-pressure hose and copious amounts of

fresh water.

Examples:

- The lower parts of hull units (outside the hull)

- Subsea units

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 253 254

Kommentare zu diesen Handbüchern

Keine Kommentare

Simrad SP270 Installationshandbuch Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Simrad SP270